The 7-Step Straumann Implant Order Checklist I Built After $4,300 in Avoidable Mistakes
-
Who this checklist is for
-
The 7-step checklist
-
Step 1: Map the case to the implant line before you touch a part number
-
Step 2: Verify restorative compatibility — the step most people skip
-
Step 3: Open the surgical kit. Actually open it.
-
Step 4: Cross-check the surgical instrument and energy device list
-
Step 5: Standardize pre-op documentation (including the ECG vs EKG problem)
-
Step 6: Decide rush vs standard — and budget for certainty, not just speed
-
Step 7: Inspect the delivery against the packing list before it hits the shelf
-
Step 1: Map the case to the implant line before you touch a part number
-
Notes and common mistakes
Who this checklist is for
I handle implant and prosthetics orders for a three-clinic dental group — roughly 60 implant cases a year. I've been doing this since 2017. In that time I've made enough mistakes to fund a small vacation for someone else. Roughly $4,300 worth, if I add up the reorders, rush fees, and one very embarrassing same-day courier charge.
This checklist is what I use now. Seven steps. It's for anyone ordering Straumann Group dental implants across more than one platform, especially if you occasionally get a case that has to be done Friday. If you're a single-clinic buyer doing five cases a year, some of this will be overkill — take what's useful.
The 7-step checklist
Step 1: Map the case to the implant line before you touch a part number
Everything I'd read about implant selection said to default to the premium surface. In practice, I found that matching the line to the case matters more than picking the most advanced option every single time.
For us, that means a Straumann Standard Plus implant for the straightforward posterior cases where bone quality is decent, and SLActive when we're dealing with compromised sites or early loading protocols. The BLT line shows up when the tapered design matters for immediate placement. Same brand, three different jobs.
The mistake I made in 2019: I ordered Standard Plus for a case with soft tissue concerns because it was what we had in stock. The restoration came back with fit issues, and we ended up redoing the impression and the abutment. $610 in parts plus a two-week delay. The lesson wasn't "always order the premium one" — it was that stock convenience is not a clinical rationale.
Step 2: Verify restorative compatibility — the step most people skip
Most buyers focus on the implant itself and completely miss the restorative components. TiBase, abutments, scan bodies — if one of these doesn't match the platform, you find out at try-in, which is the worst possible time.
I once ordered 12 implants with the right platform but the wrong TiBase variant. Checked it myself, approved it, processed it. We caught the error when the lab called two days before the patient's appointment. $890 wasted, and I had to explain to the dentist why we were scrambling through a favor from a neighboring practice.
Now I run every restorative line item against the implant platform on a paper sheet before the order goes out. It feels redundant. It has saved me at least four times.
Step 3: Open the surgical kit. Actually open it.
The conventional wisdom is that a sealed surgical kit is ready to use. My experience with 40+ kit cycles suggests otherwise.
Drill sequences get broken. A 2.8mm drill goes missing, or the torque wrench hasn't been calibrated since who-knows-when. I now open every kit the week before surgery and run through the sequence for that specific implant line. It takes 10 minutes. It has saved me from the kind of morning where you're calling every clinic in the area for a loaner drill.
This is the step most people ignore because it doesn't feel like procurement. It is procurement. A missing drill is a missing surgery.
Step 4: Cross-check the surgical instrument and energy device list
This one is easy to overlook because it's not strictly an implant order. But your surgical instrument tray — elevators, forceps, retractors — and any surgical energy device you plan to use for soft tissue management need to be on the same checklist as the implant itself.
We had a case in September 2022 where the electrosurgery handpiece wasn't in the room. Nobody had checked it because "it's always there." It wasn't. The surgery went ahead with a different technique, but the clinician wasn't happy, and I don't blame them.
I'm not 100% sure this applies to every practice, but if you do any soft tissue refinement during implant surgery, add the energy device and its grounding pad to the pre-op checklist. It's a five-second check that prevents a very long conversation.
Step 5: Standardize pre-op documentation (including the ECG vs EKG problem)
It's tempting to think documentation is somebody else's job. But when you're the one assembling the case packet, inconsistent terminology creates real friction.
Here's a small example that cost us a half-day: our patient forms used ECG on some pages and EKG on others. Same test, same meaning, different letters. But a referring physician's office flagged the packet as inconsistent and sent it back for clarification. The patient's surgery moved by three days.
Since then, I keep a one-page terminology sheet taped inside the order binder. ECG vs EKG — pick one per document set and stick to it. Same for implant platform names, torque values, and lot numbers. It sounds trivial until a packet gets rejected and you're the one making phone calls.
The value of guaranteed delivery isn't the speed. It's the certainty. For a case with a fixed date, knowing your shipment will arrive is often worth more than a lower price with "estimated" delivery.
Step 6: Decide rush vs standard — and budget for certainty, not just speed
Granted, rush fees feel like a tax. I get why people try to avoid them. But after getting burned twice by "probably on time" promises, I now budget for guaranteed delivery on any case with a fixed date.
In March 2024, we paid $400 extra for a rush shipment on a full-arch case. The alternative was missing a $15,000 procedure that had been on the books for six weeks. That's not a hard calculation.
The lesson isn't "always pay for rush." It's that uncertainty has a price, and it's usually higher than the rush fee. A vendor saying "it should arrive Thursday" is not saying the same thing as one saying "it will arrive Thursday, or we refund the premium." Those are different products.
Step 7: Inspect the delivery against the packing list before it hits the shelf
Last step, and I still catch things here. Lot numbers, expiration dates, sterile packaging integrity, and actual quantity versus the invoice.
We've caught 47 potential errors using this check in the past 18 months — wrong lengths, missing cover screws, one box that had clearly been opened and resealed. None of them were catastrophic on their own. All of them would have been a problem on surgery day.
I'm not going to pretend this is exciting work. It's the kind of thing you do while half-listening to a podcast. Do it anyway, before the boxes go into the storage room, because once they're shelved they become "stuff we already have" and nobody checks them again.
Notes and common mistakes
A few things I'd add after four years of running this checklist:
- Don't skip Step 3 because the kit "looks sealed." Sealed and complete are different things.
- The ECG/EKG thing sounds trivial until a packet gets rejected. Terminology consistency is cheap insurance.
- Rush fees are not the enemy. Unclear delivery commitments are.
- Keep the checklist somewhere you'll actually see it. Ours is laminated and clipped to the order desk. Digital versions get ignored; physical ones get used.
- Update it after every mistake. If I make a new error and the checklist didn't catch it, the checklist gets a new line item. That's the whole system.
None of this is sophisticated. It's just the difference between ordering implants and actually getting the right ones into the right surgery on the right day.